1.PC/ABS

Libaka tse tloaelehileng tsa ts'ebeliso: matlo a komporo le mochini oa khoebo, lisebelisoa tsa motlakase, mohloa le metjhini ea jareteng, li-dashboard tsa likarolo tsa likoloi, li-interiors le likoahelo tsa mabili.

Maemo a ho bopa ka ente.
Kalafo ea ho omisa: Ho omisa kalafo pele ho sebetsa hoa hlokahala.Mongobo o lokela ho ba tlase ho 0.04%.Maemo a khothalletsoang a ho omisa ke 90 ho 110 ° C le lihora tse 2 ho isa ho tse 4.
Mocheso o qhibilihang: 230℃300℃.
Mocheso oa hlobo: 50℃100℃.
Khatello ea ente: e itšetlehile ka karolo ea polasetiki.
Lebelo la ente: hodimo kamoo ho ka kgonehang.
Lintho tsa lik'hemik'hale le tsa 'mele: PC/ABS e na le thepa e kopaneng ea PC le ABS.Mohlala, litšobotsi tse bonolo tsa ho sebetsa tsa ABS le thepa e ntle ea mochini le botsitso ba mocheso oa PC.Karolelano ea bobeli e tla ama botsitso ba mocheso oa thepa ea PC / ABS.thepa e nyalisitsoeng joalo ka PC / ABS e boetse e bonts'a thepa e ntle ea phallo.

2.PC/PBT
Lisebelisoa tse tloaelehileng: li-gearbox, li-bumpers tsa likoloi le lihlahisoa tse hlokang ho hanyetsa lik'hemik'hale le ho senya, botsitso ba mocheso, ho hanyetsa tšusumetso le botsitso ba geometri.
Maemo a ho bopa ka ente.
Ho omisa kalafo: 110 ~ 135 ℃, hoo e ka bang lihora tse 4 ho omisa kalafo ho khothaletsoa.
Mocheso o qhibilihang: 235 ~ 300℃.
Mocheso oa hlobo: 37～93℃.
Lik'hemik'hale le thepa ea 'mele PC/PBT e na le thepa e kopantsoeng ea bobeli ba PC le PBT, tse kang ho tiea ho hoholo le botsitso ba geometri ea PC le botsitso ba lik'hemik'hale, botsitso ba mocheso le thepa ea lubrication ea PBT.

3.PE-HD

Lisebelisoa tse tloaelehileng: lijana tsa sehatsetsing, lijana tsa polokelo, lisebelisoa tsa ntlo tsa kichine, li-lids tse koalang, joalo-joalo.

Maemo a ho bopa ka ente.
Ho omisa: Ha ho hlokahale hore o omelle haeba o bolokiloe hantle.
Mocheso o qhibilihang: 220 ho isa ho 260°C.Bakeng sa lisebelisoa tse nang le limolek'hule tse kholoanyane, mocheso o khothalletsoang oa ho qhibiliha o pakeng tsa 200 le 250 ° C.
Mocheso oa hlobo: 50-95°C.Mocheso o phahameng oa hlobo o lokela ho sebelisoa bakeng sa botenya ba lebota bo ka tlase ho 6mm le mocheso o tlase oa hlobo bakeng sa botenya ba lebota bo kaholimo ho 6mm.Mocheso o pholileng oa likarolo tsa polasetiki o lokela ho ba o ts'oanang ho fokotsa phapang ea shrinkage.Bakeng sa nako e nepahetseng ea potoloho, bophara ba sekoti sa ho pholisa ha boa lokela ho ba ka tlase ho 8mm 'me sebaka se tsoang holim'a hlobo e lokela ho ba ka hare ho 1.3d (moo "d" e leng bophara ba sebaka se phodileng).
Khatello ea ente: 700 ho 1050 bar.
Lebelo la ente: Ho khothaletsoa ente ea lebelo le phahameng.Limathi le liheke: Bophara ba semathi bo lokela ho ba pakeng tsa 4 le 7.5 mm 'me bolelele ba semathi bo be bokhutšoane kamoo ho ka khonehang.Mefuta e fapaneng ea liheke e ka sebelisoa mme bolelele ba heke ha boa lokela ho feta 0.75mm.haholo-holo e loketseng ho sebelisa hlobo ea semathi se chesang.
Thepa ea lik'hemik'hale le 'mele: Bokhabane bo phahameng ba PE-HD bo fella ka ho teteana ho hoholo, matla a tsitsitseng, mocheso o sothehileng oa mocheso, viscosity le botsitso ba lik'hemik'hale.PE-HD e na le khanyetso e phahameng ea ho kenella ho feta PE-LD.PE-HD e na le tšusumetso e tlase.Thepa ea PH-HD e laoloa haholo ke ho teteana le kabo ea boima ba limolek'hule.Kabo ea boima ba limolek'hule ea PE-HD e loketseng ho bopa ente e moqotetsane haholo.Bakeng sa boima ba 0.91-0.925g / cm3, re e bitsa mofuta oa pele oa PE-HD;bakeng sa boima ba 0.926-0.94g / cm3, e bitsoa mofuta oa bobeli oa PE-HD;bakeng sa boima ba 0.94-0.965g / cm3, e bitsoa mofuta oa boraro oa PE-HD.-Thepa e na le litšobotsi tse ntle tsa phallo, e nang le MFR pakeng tsa 0.1 le 28. Ha boima ba molek'hule bo phahame, bo futsanehile litšobotsi tsa phallo ea PH-LD, empa ka matla a matla a ts'usumetso.PE-LD ke thepa ea semi-crystalline e nang le shrinkage e phahameng. ka mor'a ho bōptjoa, pakeng tsa 1.5% le 4%.PE-HD e ka hlaseloa habonolo ke khatello ea tikoloho.PE-HD e qhibiliha habonolo ka lihlapolli tsa hydrocarbon mochesong o ka holimo ho 60C, empa khanyetso ea eona ea ho qhibiliha e batla e le betere ho feta ea PE-LD.

4.PE-LD
Ho omisa: ka kakaretso ha ho hlokahale
Mocheso o qhibilihang: 180℃ 280℃
Mocheso oa hlobo: 20℃ 40 ℃ E le ho finyella pholileng e ts'oanang le ho fokotsa mocheso o eketsehileng oa moruo, ho kgothaletswa hore bophara ba pholileng e be bonyane 8mm le sebaka sa ho tloha sebakeng se phodileng ho ea sebakeng sa hlobo ha sea lokela ho feta makhetlo a 1.5. bophara ba cavity e phodileng.
Khatello ea ente: ho fihla ho 1500 bar.
Ho tšoara khatello: ho fihlela ho 750 bar.
Lebelo la ente: Lebelo le potlakileng la ente le khothaletsoa.
Limathi le liheke: Mefuta e fapaneng ea limathi le liheke li ka sebelisoa PE e loketse ka ho khetheha ho sebelisoa le liforomo tsa semathi se chesang.
Lintho tsa lik'hemik'hale le tsa 'mele: Boima ba thepa ea PE-LD bakeng sa tšebeliso ea khoebo ke 0.91 ho 0.94 g / cm3.PE-LD e khoneha ho khase le mouoane oa metsi.The coefficient e phahameng ea katoloso ea mocheso oa PE-LD ha e loketse lihlahisoa tsa ho sebetsa. bakeng sa tšebeliso ea nako e telele.Haeba boima ba PE-LD bo pakeng tsa 0.91 le 0.925g / cm3, joale tekanyo ea eona ea ho fokotseha e pakeng tsa 2% le 5%;haeba letsoalo le pakeng tsa 0.926 le 0.94g / cm3, joale sekhahla sa eona sa ho fokotseha se pakeng tsa 1.5% le 4%.Ho fokotseha ha 'nete hona joale ho boetse ho itšetlehile ka mekhoa ea ho etsa ente.PE-LD e hanana le lihlapolli tse ngata mochesong oa kamore, empa metsoako ea hydrocarbon e nkhang hamonate e ka etsa hore e ruruhe.E ts'oana le PE-HD, PE-LD e kotsing ea khatello ea tikoloho.